|
|
lab:
port channel: channel port is two lines, direct mode active will report an error, because e0/0 is pre-set desirable, have to no first.
BGP: address-family ipv4
COPP: question 1 change to ospf (dump is EIGRP) and ICMP change to telnet.
OSFP: router ospf, which is an aggregation route
vrf tunnel: only the value changes, SW11 ping SW22 fail, reason is SW22 does not have the route to back
Enable Flexible NetFlow: only values change
|
|
English
Post time 30-3-2025 13:38:15
